FloPlast 110mm Underground Drainage Back Inlet Bottle Gully with Circular Grid.
This FloPlast 110mm Underground Drainage fitting is suitable to use with 110mm diameter Underground Drainage pipes, couplings & other fittings.
All FloPlast Gullies hold water to stop foul air escaping from the foul drainage system. They are designed to accept waste water from kitchens, utility rooms and ground floor bathrooms, rainwater from paved areas and roofs.
It is desirable that the bottle gully be connected to a manhole, but due to the fact that it is roddable it may be positioned up to 22 metres away from one. However, the Gully must be less than 12 metres from the drain and a set of drain rods must be able to pass right through the junction.
To view FloPlast technical information with regards to the fitting of gullies CLICK HERE
All FloPlast underground drainage fittings with sockets have a captive seal and snap cap which are designed to be user friendly with no sharp edges and with space restrictions in mind. These allow for an easy installation. The seal is double ribbed and the sockets incorporate a recessed area to provide space for the rubber seal to locate as the pipe is inserted, forming a high-capacity pressure point.
All the fittings & pipes in our Underground Drainage range comply to the relevant British Standards where applicable.
Avaliable in Terracotta only.
Price includes VAT
